Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process

Patricia Munoz De Escalona, Paul G. Maropoulos

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Surface finish is one of the most relevant aspects of machining operations, since it is one of the principle methods to assess quality. Also, surface finish influences mechanical properties such as fatigue behavior, wear, corrosion, etc. The feed, the cutting speed, the cutting tool material, the workpiece material and the cutting tool wear are some of the most important factors that affects the surface roughness of the machined surface. Due to the importance of the martensitic 416 stainless steel in the petroleum industry, especially in valve parts and pump shafts, this material was selected to study the influence of the feed per tooth and cutting speed on tool wear and surface integrity. Also the influence of tool wear on surface roughness is analyzed. Results showed that high values of roughness are obtained when using low cutting speed and feed per tooth and by using these conditions tool wear decreases prolonging tool life.
Original languageEnglish
Title of host publicationProceedings of the ASME 2009 Pressure Vessels and Piping Division Conference PVP2009
PublisherAmerican Society of Mechanical Engineers (ASME)
Pages1707-1716
Number of pages10
Volume6
ISBN (Electronic)9780791838549
ISBN (Print)9780791843697
DOIs
Publication statusPublished - 26 Jul 2009

Fingerprint

Martensitic stainless steel
Wear of materials
Surface roughness
Cutting tools
Petroleum industry
Machining
Pumps
Fatigue of materials
Corrosion
Mechanical properties

Keywords

  • wear
  • cutting
  • milling
  • stainless steel

Cite this

Munoz De Escalona, P., & Maropoulos, P. G. (2009). Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process. In Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference PVP2009 (Vol. 6, pp. 1707-1716). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/PVP2009-77024
Munoz De Escalona, Patricia ; Maropoulos, Paul G. / Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process. Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference PVP2009 . Vol. 6 American Society of Mechanical Engineers (ASME), 2009. pp. 1707-1716
@inproceedings{36745057b21741e4bd57f2e90266e6bf,
title = "Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process",
abstract = "Surface finish is one of the most relevant aspects of machining operations, since it is one of the principle methods to assess quality. Also, surface finish influences mechanical properties such as fatigue behavior, wear, corrosion, etc. The feed, the cutting speed, the cutting tool material, the workpiece material and the cutting tool wear are some of the most important factors that affects the surface roughness of the machined surface. Due to the importance of the martensitic 416 stainless steel in the petroleum industry, especially in valve parts and pump shafts, this material was selected to study the influence of the feed per tooth and cutting speed on tool wear and surface integrity. Also the influence of tool wear on surface roughness is analyzed. Results showed that high values of roughness are obtained when using low cutting speed and feed per tooth and by using these conditions tool wear decreases prolonging tool life.",
keywords = "wear, cutting, milling, stainless steel",
author = "{Munoz De Escalona}, Patricia and Maropoulos, {Paul G.}",
year = "2009",
month = "7",
day = "26",
doi = "10.1115/PVP2009-77024",
language = "English",
isbn = "9780791843697",
volume = "6",
pages = "1707--1716",
booktitle = "Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference PVP2009",
publisher = "American Society of Mechanical Engineers (ASME)",

}

Munoz De Escalona, P & Maropoulos, PG 2009, Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process. in Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference PVP2009 . vol. 6, American Society of Mechanical Engineers (ASME), pp. 1707-1716. https://doi.org/10.1115/PVP2009-77024

Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process. / Munoz De Escalona, Patricia; Maropoulos, Paul G.

Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference PVP2009 . Vol. 6 American Society of Mechanical Engineers (ASME), 2009. p. 1707-1716.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process

AU - Munoz De Escalona, Patricia

AU - Maropoulos, Paul G.

PY - 2009/7/26

Y1 - 2009/7/26

N2 - Surface finish is one of the most relevant aspects of machining operations, since it is one of the principle methods to assess quality. Also, surface finish influences mechanical properties such as fatigue behavior, wear, corrosion, etc. The feed, the cutting speed, the cutting tool material, the workpiece material and the cutting tool wear are some of the most important factors that affects the surface roughness of the machined surface. Due to the importance of the martensitic 416 stainless steel in the petroleum industry, especially in valve parts and pump shafts, this material was selected to study the influence of the feed per tooth and cutting speed on tool wear and surface integrity. Also the influence of tool wear on surface roughness is analyzed. Results showed that high values of roughness are obtained when using low cutting speed and feed per tooth and by using these conditions tool wear decreases prolonging tool life.

AB - Surface finish is one of the most relevant aspects of machining operations, since it is one of the principle methods to assess quality. Also, surface finish influences mechanical properties such as fatigue behavior, wear, corrosion, etc. The feed, the cutting speed, the cutting tool material, the workpiece material and the cutting tool wear are some of the most important factors that affects the surface roughness of the machined surface. Due to the importance of the martensitic 416 stainless steel in the petroleum industry, especially in valve parts and pump shafts, this material was selected to study the influence of the feed per tooth and cutting speed on tool wear and surface integrity. Also the influence of tool wear on surface roughness is analyzed. Results showed that high values of roughness are obtained when using low cutting speed and feed per tooth and by using these conditions tool wear decreases prolonging tool life.

KW - wear

KW - cutting

KW - milling

KW - stainless steel

U2 - 10.1115/PVP2009-77024

DO - 10.1115/PVP2009-77024

M3 - Conference contribution

SN - 9780791843697

VL - 6

SP - 1707

EP - 1716

BT - Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference PVP2009

PB - American Society of Mechanical Engineers (ASME)

ER -

Munoz De Escalona P, Maropoulos PG. Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process. In Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference PVP2009 . Vol. 6. American Society of Mechanical Engineers (ASME). 2009. p. 1707-1716 https://doi.org/10.1115/PVP2009-77024