Built-up edge effect on tool wear when turning steels at low cutting speed

Zulay Cassier, Yidney Prato, Patricia Munoz De Escalona

Research output: Contribution to journalArticle

Abstract

In any machining process, it is very important to control the cutting variables used during the process because these will affect, for example, tool life and workpiece surface roughness. Since the built-up edge (BUE) increases the wear of the tool and affects the surface roughness of the workpiece, the study of this phenomenon is very important in predicting and minimizing the wear of a cutting tool. This research studies the influence of the BUE formation for coated carbide tools when turning medium- and high-strength steels. Different mathematical expressions were obtained to quantify this effect. Mathematical expressions for uncoated carbide tools were not possible to obtain, due to the fact that for these tools an increase in the wear and their premature fracture was observed.
Original languageEnglish
Pages (from-to)542-547
Number of pages6
JournalJournal of Materials Engineering and Performance
Volume13
Issue number5
DOIs
Publication statusPublished - Oct 2004

Keywords

  • built-up edge
  • machine tools
  • materials
  • metallurgic
  • process
  • turning

Fingerprint Dive into the research topics of 'Built-up edge effect on tool wear when turning steels at low cutting speed'. Together they form a unique fingerprint.

  • Cite this